Cleanroom ducts and accessories
Cleanroom ducts and accessories
The section size of the air duct in the purification workshop should meet the requirements for cleaning the inner wall, and a cleaning port should be installed. The air duct should be made of materials that are not easy to fall off particulate matter, not easy to rust, and resistant to disinfection; the air purification system should be installed as required Electric airtight valve, air volume control valve, fire damper...
Text label: purification workshop design and installation, purification workshop decoration company, air duct installation, purification workshop engineering company
Purification workshop air ducts and accessories
The section size of the air duct in the purification workshop should meet the requirements for cleaning the inner wall, and a cleaning port should be installed. The air duct should be made of materials that are not easy to fall off particulate matter, not easy to rust, and resistant to disinfection; the air purification system should be installed as required Electric airtight valves, air volume control valves, fire dampers, check valves and other accessories, air supply and return air pipe sections should be equipped with air volume adjustment devices. The air duct of the ventilation and purification air conditioning system should be equipped with a fire damper with a temperature of 70°C: crossing the fire compartment; crossing the room partition wall and floor slab of the ventilation and air conditioning machine room; crossing both sides of the deformation joint of the fire partition; On the horizontal pipe segment at the junction of the vertical air duct and the horizontal air duct of each layer.
The air duct and regulating valve of the air conditioning system of the pharmaceutical purification pharmaceutical cleanroom, as well as the protective net, orifice plate and diffusion orifice plate of the high-efficiency air filter and other accessories should be made according to the cleanliness level of the conveyed air and the air in which it is located. The environmental conditions are determined; the materials and coatings for accessories such as air ducts, regulating valves and check valves of the indoor exhaust system should be determined according to the form of the exhaust gas and the air environment conditions; The air volume measuring device should be installed on the fresh air duct, supply air, return air and exhaust air main pipe. The high-efficiency air filter at the end of each system should be provided with leak detection holes, and the pressure of the high-efficiency air filter at the end of each system should be set. The difference meter should not be less than 2; the production materials and coatings of the air supply pipe, exhaust pipe, air valve and air outlet of the purification workshop should be resistant to corrosion by disinfectants. Zhongjing Global Purification can provide consulting, planning, design, construction, installation and other supporting services for purification workshops and purification plants.
In the operation of the purification air conditioning system, the air cleanliness, temperature, humidity, indoor pressure difference, unidirectional flow velocity and flow pattern of the purification workshop under static and dynamic conditions should be monitored and operated. Records, and set key parameter overrun alarms; static and dynamic monitoring of air suspended particles in aseptic production purification workshops, and dynamic monitoring of microorganisms; key operating areas of aseptic production The monitoring system should be set up separately from the control system of the purification air conditioning system; the monitoring and control of the heating system, ventilation system, dust removal and purification system, air conditioning conditioning system, air conditioning cold and heat source and air conditioning water system in the purification workshop, sensors, execution The selection and use of the air conditioner shall comply with the provisions of the current standards; the electric heating and electric humidification of the purification air conditioning system shall be interlocked with the blower, and shall be provided with no wind and over-temperature power-off protection. The metal duct should be grounded.
If you are a extraction machine fan, you definitely want to enjoy the best possible. The that you choose plays a major role with the kind of experience you have when using it.
For good quality extraction machine and a good variety of products to choose from, visit SUZHOU PHARMA MACHINERY CO.,LTD. at PHARMA MACHINERY.
Among improvements to CUSTOM SOLUTION SERVICES, nearly half of consumers considered quality and service as the most important change a business could make in its supply chain.
SUZHOU PHARMA MACHINERY CO.,LTD. is the best manufacturer which has rich experience on manufacturing.