Contents of air volume and speed detection after purification workshop construction

Contents of air volume and speed detection after purification workshop construction

1. Detect the operation of fans and other equipment

First, check whether the fan is running normally, whether the various components and devices can operate normally, and whether there are obstacles before the construction of the purification workshop is checked. The valve should be fixed in the corresponding opening position, and the measurement must be carried out. The size of the air outlet and air duct to be tested. The second is that the small scale or reading of the indoor and wind anemometer should not be greater than the standard. Generally, a thermal bulb anemometer can be used, and an ultrasonic three-dimensional anemometer should be used when the sub-velocity needs to be measured. When there are accessories such as nets, orifices, and louvers on the tuyere, the measuring surface should have a corresponding distance from it, and the measuring area should be calculated according to the area of u200bu200bthe tuyere. Regarding the louver tuyere, the corresponding measuring points can also be selected at both ends of each two louvers, and the measuring points shall be directly opposite to the oblique airflow between the blades.

2. Use a variety of methods to detect air volume, wind speed, etc.

When using the method to measure the air volume (wind speed) of the tuyere in the construction of the purification pharmaceutical cleanroom, the accessories and decorations on the tuyere need to be kept as they are. When using the air volume measurement method with a flow meter, the air volume can be directly obtained. The area of u200bu200bthe air volume cover should be close to the area of u200bu200bthe air outlet. When measuring, the air volume mask should be completely covered by the filter or air outlet. When measuring the negative pressure air volume such as fresh air volume and return air volume The limitations of environmental conditions also need to be further considered, and the tuyere method can be used when the casing and the air volume cover cannot be used, and the air duct cannot be detected.

The above is the introduction of the air volume and speed detection after the construction of the purification workshop.

is frequently used by people in daily life since it can improve extraction machine and extraction machine.

SUZHOU PHARMA MACHINERY CO.,LTD. is a rapidly growing Manufacturing Company based in China. We offer a wide range of equipment that helps in extraction machine which are safe, durable and economical. We provide CUSTOM SOLUTION SERVICES, extraction machine, extraction machine,etc. more about and CUSTOM SOLUTION SERVICES solutions are covered in PHARMA MACHINERY. Take a visit!

CUSTOM SOLUTION SERVICES is one of the best products sold in the market today.

With so many suggestions and tips on diferent solutions to extraction machine issues, it is truly important to know how to find the most appropriate CUSTOM SOLUTION SERVICES at economical price.

Though the cost of these sustainability initiatives as CUSTOM SOLUTION SERVICES can be high, harnessing the power of an ethical supply chain to appeal to conscientious consumers can be a smart move both ethically and financially.