Cosmetic clean room purification engineering design and installation management
●Products that generate dust or use harmful, flammable and explosive raw materials in the cosmetic production process must use a separate production workshop. ●The total area of the production, filling and packaging rooms shall not be less than 100 square meters, the per capita area shall not be less than 4 square meters, and the clear height of the workshop shall not be less than 2.5 meters. ●The floor of the production workshop should be flat, safe, non-slip, safe, and impervious to water, which is easy to clean and disinfect. The floor of the work area that needs to be cleaned should have a slope without water accumulation, and a clean floor drain should be set at the top. ●In the production workshop with air purification device, the air inlet should be far away from the air outlet, the height of the air inlet should be no less than 2 meters from the ground, and there should be no pollution sources nearby. For ultraviolet disinfection, the intensity of the ultraviolet disinfection lamp shall not be less than 70 microwatts/square centimeter, and shall be set at 30 watts/10 square meters, and shall be hoisted 2 meters above the ground. ●The total number of bacteria in the air of the production pharmaceutical cleanroom shall not exceed 1000/cubic meter. ●Bacterial air can easily cause secondary pollution to products in the manufacturing, standing, filling and packaging of cosmetics. According to the requirements of the new edition of 'Hygienic Specifications for Cosmetics Production Enterprises': the total number of bacteria in the air of the production pharmaceutical cleanroom shall not exceed 1000 / cubic meter. or air disinfection facilities.
SUZHOU PHARMA MACHINERY CO.,LTD. will continue to build a corporate culture that respects and values the unique strengths and cultural differences of our associates, customers and community.
PHARMA is the vital link in the supply chain, adding value with efficient and cost-effective service and solutions for our customers and our suppliers.
Our company is professional in manufacturing CUSTOM SOLUTION SERVICES especially extraction machine.