Electronic Interlock Installation

Hello, I will now explain the installation method of this interlock If it is with an indicator light, there is a six-star cable with 6 ports below.Then plug one of the two sockets behind an indicator light Then connect to the controller The same light socket, the same lock needs to be installed on the same door This is door a, and this side is door b Then, if it is interlocked, it has a sensing zone The lock body is installed on the door frame This is the induction sub plate, which is installed on the door panel Then the sensor should be aligned with the launch area here Align like this If the sensing area reverses, it will be unable to sense Then the mortise lock is connected the five-star on the back is the socket of the mortise lock and then it is connected to the five-star socket on the top of the controller. After the same installation is completed on both sides, there are green lights on both sides Then when door a is opened, door b lights up red and locks Then there will be an unlocking button in the middle of the indicator light,  and pressing the button can unlock the closed door The indicator will alarm when a door is opened for more than 15 seconds

Suzhou Pharma Machinery Co.,Ltd.

2022/11/23

Birkey