how to remove grinder from breville coffee machine
How to Remove Grinder from Breville Coffee Machine
The grinder is an essential component of a Breville coffee machine. It's responsible for grinding coffee beans and ensuring that you get a fresh and flavorful cup of coffee. However, there may come a time when the grinder needs to be removed, either for cleaning or replacement. Removing the grinder from a Breville coffee machine may seem like a daunting task, but it's actually quite simple if you follow the right steps. In this article, we'll provide you with a step-by-step guide on how to remove the grinder from your Breville coffee machine.
1. Turn off and Unplug the Machine
Before proceeding to remove the grinder, ensure that your Breville coffee machine is turned off and unplugged from the power source. This step is crucial to prevent any electrical accidents from occurring. Unplugging the machine assures that the grinder will not suddenly turn on by accident.
2. Locate the Grinder
The next step is to locate the grinder. In most Breville machines, the grinder is located either at the back or side of the machine. Once you have found the grinder, remove any coffee beans that may be inside. Do this by turning the dial on the bean hopper counter-clockwise until it comes off.
3. Remove the Top Burr
The grinder has two burrs; a top burr and a bottom burr. To remove the top burr, you need to unscrew it from the grinder. Use a flathead screwdriver to turn the screws counter-clockwise until they come off. Then, lift the top burr out of the grinder. Be careful as the burr might have sharp edges.
4. Remove the Bottom Burr
Next, you need to remove the bottom burr. To do this, hold the upper burr holder firmly and pull up to remove it from the machine. Once the holder is removed, use a flathead screwdriver to unscrew the burr clockwise. Then, lift the burr out from the grinder. Ensure that you clean it thoroughly with a brush and soft cloth.
5. Clean and Reassemble the Grinder
After removing both burrs, use a brush to clean the grinder of any remaining debris. You can also clean the burrs with a soft cloth and warm soapy water. Please note that the burrs can be sharp, so handle them with care. Finally, reassemble the grinder following the steps above and tighten the screws to secure them in place.
Conclusion
Removing the grinder from your Breville coffee machine may seem daunting, but it's a simple task if you follow the right steps. Ensure that you turn off and unplug the machine before starting the process. Locate the grinder and remove the top burr, followed by the bottom burr. Clean the grinder and the burrs thoroughly, then reassemble the grinder. By following these steps, you can maintain the cleanliness of your Breville coffee machine and replace the grinder if needed.