Introduce the lighting method of clean engineering

Introduce the lighting method of clean engineering

The lighting methods of the clean project are as follows:

（1）General lighting

It refers to the lighting set to illuminate the entire illuminated area regardless of specific local needs.

(2) Local lighting

This refers to lighting that is set to increase the illuminance of a specific location (such as a work point). But in indoor lighting, local lighting is generally not used alone.

(3) Mixed lighting

This refers to the illumination that the illumination on the working surface is composed of general illumination and local illumination, in which the illumination of general illumination should account for 10%-15% of the total illumination according to the clean engineering design specifications, but not less than 150LX. The luminous flux received on a unit illuminated area is the lighting unit lux (LX).

When using natural light, it can allow higher illuminance, so it is beneficial to work, so the lighting of the clean project adopts both artificial light and natural light, which is also to save energy consumption.