Introduction to the material and structural characteristics of the punching machine
The punching machine is made of stainless steel material by precision machining, and the support frame is made of aluminum alloy material. The upper and lower parts can be disassembled independently, which is convenient for transportation. The studio is sealed by a fully transparent plexiglass cover, which can effectively prevent mosquitoes and dust, clean and beautiful, the working situation is clear at a glance, and the waste is easy to clean, and it is absolutely in line with the national GMP production standard. The glass cover can be removed when removing residual powder and waste, which is very convenient. Structural features of the tablet machine: 1. This machine is a tablet pressing machine with continuous sub-station pressure and automatic feeding, with high output and good reliability. It is mainly used in the pharmaceutical industry, and can also be used in food, chemical and other industrial sectors. It is the basic pharma machinery for processing various granular raw materials and processing or tableting. 2. It is suitable for mass production and pressing of various round tablets, sugar tablets or calcium tablets, etc. 3. It is not suitable for semi-solid, wet powder and non-granular very fine powder. 4. The upper part of the machine is a tablet pressing structure. 17 dies are evenly distributed on the turntable. The die is composed of upper punch, middle die and lower punch. The tails of the upper and lower punches are embedded on the fixed curved guide rail. When the turntable rotates, the punch With the constant speed lifting movement of the curved track guide, the tablet pressing is completed when the upper and lower punches pass through the cylindrical surface of the pressing wheel. 5. The work of tablet pressing is divided into three procedures: ①filling, ②pressurizing, and ③discharging tablets, which are carried out continuously. There is no adjustment control mechanism for filling and pressurization, and there are instructions on the watch plate, which is easy to operate. 6. The machine adopts a flow grid feeding mechanism, which can make the material fill the die hole evenly and reduce the difference in tablet weight. 7. The motor is installed in the machine base, and the worm is driven by a V-belt to drive the turntable, and a stepless pulley is installed on the motor shaft. Through the movement of the motor, the speed can be adjusted arbitrarily to reduce the disc weight difference. 8. There is a powder suction box on the side of the machine base, which includes a blower, a powder storage room, and a powder filter room. When the machine is running at high speed, flying powder and powder falling from the middle mold will be removed through the powder suction box to avoid sticking. Plug it and keep it running smooth and normal.
Wow, this sounds like a bit of a cruel question, but it is a vitally important question to ask yourself if you are struggling with your extraction machine and you would like to stop the CUSTOM SOLUTION SERVICES problem.
Our knowledgeable loss prevention experts can help commercial customers reduce losses in CUSTOM SOLUTION SERVICES.
We persevere in keeping the customers pleasant and supporting them with CUSTOM SOLUTION SERVICES at a reasonable price.
extraction machine CUSTOM SOLUTION SERVICES offer a wide range of extraction machine and gave the user the choice of extraction machine, extraction machine and extraction machine.
CUSTOM SOLUTION SERVICES has a very good repute over the global market.