Material and appliance management in preparation purification workshop
Material and appliance management in preparation purification workshop
The preparation purification pharmaceutical cleanroom enters and exits materials according to the logistics channel. The outer packaging of the materials stored in the warehouse should be kept clean, tidy and intact, and should be stacked in the designated area. The workshop is not allowed to accumulate excess materials; all materials entering the operation room are generally in the designated area. Take off the outer packaging and...
Text label: preparation purification workshop, purification workshop design, material and appliance management
Material and equipment management in preparation purification pharmaceutical cleanroom
The preparation purification workshop enters and exits materials according to the logistics channel. The outer packaging of the materials stored in the warehouse should be kept clean, tidy and intact, and should be stacked in the designated area. The workshop is not allowed to accumulate excess materials; all materials entering the operation room are generally in the designated area. Take off the outer packaging, and then enter the operation room. For special materials that cannot be removed from the outer packaging, the operator should clean the dust with a cleaning rag, and then enter the operation room to avoid bringing dust into the workshop. The production area should be moved out according to the material channel. When the material enters the Class B clean area, the operator checks the product name, batch number, quantity, and the condition of the outer packaging in the general production area, then removes the outer packaging, returns the outer packaging, and cleans the studio; the materials entering the clean area use 75% Disinfect the outer wall of the outer packaging container with ethanol solution, put it into the transfer window of the buffer corridor, turn on the ultraviolet light for 30 minutes to disinfect, take out the material from the transfer window in the sterile corridor, and then wipe the outer wall of the material with an ultra-fine cloth moistened with 75% ethanol. Introduce into the B-level clean area; the ampoules are sterilized by the tunnel oven and enter the B-level area. After the operator's hands are disinfected, the rubber stopper and aluminum cover are taken out and stored in the designated container.
The material enters the C-level clean area. The operator removes the outer packaging box of the material in the designated area, removes the dust and dirt outside the material packaging, wipes the outer packaging with a damp clean cloth, and wipes the outer wall of the material with 75% ethanol solution. Put it into the transfer window, turn on the ultraviolet light for 30 minutes, and the operator opens the transfer window to take out the material and put it in the designated place in the studio. When the material enters the Class D clean area, the operator usually takes off the outer packaging of the material at the designated location in the production area, wipes the surface of the material with a cleaning cloth, and transfers it to the studio. Zhongjing Global Purification can provide consulting, planning, design, construction, installation, transformation and other supporting services for purification workshops and clean workshops.
Generally, the containers and utensils in the production area should be cleaned once after use; the varieties should be cleaned for cleaning; the production in batches or the production stop should be cleaned before the start of construction; if any abnormality occurs, the product quality will be affected, and it needs to be cleaned; Cleaning tools such as brushes and cleaning cloths; after using the containers, wash them with drinking water, if necessary, use a little detergent to remove stains or dust, and then rinse off the residue of the detergent with water; the cleaned containers are stored upside down in Designate the location, and hang a 'cleaned' status sign; the cleaned containers and utensils should have no visible stains and residues on the surface after visual inspection. Cleaning tools used in general production areas: mops, rags, brooms, buckets, pegs; cleaning tools used in class D clean areas: mops, cleaning cloths, buckets, pegs, mercerized towels; cleaning tools used in class C clean areas : Cleaning cloth that does not shed fibers; cleaning tools used in Class B and Class A clean areas: ultra-fine cloth, cleaning cloth that does not shed fibers.
SUZHOU PHARMA MACHINERY CO.,LTD., the best suppliers of domestic markets, has good faith in manufacturing.
Have you been looking for a good CUSTOM SOLUTION SERVICES extraction machine provider? If so, we suggest that you check out SUZHOU PHARMA MACHINERY CO.,LTD. at PHARMA MACHINERY.
CUSTOM SOLUTION SERVICES can be great additions to companies looking to improve the well-being of their employees, as well as increase the efficiency and productivity of their workers across the organization.