PHARMA High Speed Rotary Tablet Press Manual_Tablet Press_High Speed_Single Punch_Double Layer_Flower Basket_Multifunctional Rotary Tablet Press
PHARMA High Speed Rotary Tablet Press Manual
1. Before using the PHARMA high-speed rotary tablet press, you must repeatedly check the quality of the mold, whether there are missing edges, cracks, deformation and looseness, and whether the equipment is intact.
2. Check whether the powder of the granule material is dry, and the powder content in the granule is preferably not more than 10%. If it is unqualified, please do not press hard, otherwise it will affect the normal operation and service life of the PHARMA high-speed rotary tablet press machine and the loss of raw materials.
3. During the first test run of the PHARMA high-speed rotary tablet press, put the indicator needle controlled by the pressure regulator on No. 6, pour the powder into the bucket, turn the test wheel by hand, adjust the filling volume and gradually increase the pressure weight and hardness. tablet. Finished product requirements, then start the motor, and then open the clutch to carry out formal production operations. During the production process, it is necessary to regularly check whether the quality of the tablet meets the requirements, and make adjustments if necessary.
4. The choice of speed directly affects the service life of the high-speed rotary tablet press. Due to the nature of the viscosity of the raw material and the size and pressure of the material cannot be uniformly defined in use, the structure of the machine is a continuously variable speed device, which is suitable for slow-speed suppression of minerals. Plant grass has a large diameter with poor viscosity, etc., and materials that are difficult to form quickly. Fast bonding, good glide and easy to mold material. Therefore, users must determine according to the actual situation.
5. The operator must be familiar with the technical performance of the machine, as well as the internal structure, the use principle of the control mechanism and the workplace during operation to prevent damage to machine parts and ensure safe production.
6. During use, you should always pay attention to whether the sound of the high-speed rotary tablet press is normal. When you encounter screams and strange sounds, stop checking and eliminate them, and don't use them reluctantly.