PHARMA: Please pay attention to these points when using the rotary tablet press_Tablet press_high speed_single punch_double layer_flower basket_multifunctional rotary

The rotary tablet press can adjust the speed of the turntable, the filling depth of the material and the thickness of the tablet. A mechanical buffer on the tablet press prevents damage to machine parts due to overload. The tablet press is equipped with a powder suction box. The suction nozzle can absorb the dust generated when the tablet press rotates, avoid sticking and clogging, and recover raw materials for reuse.

When using a rotary tablet press, it is important to note the following:

1. Before using the tablet press, the quality of the mold must be checked repeatedly, whether there are missing edges, cracks, deformation and looseness, and whether the device is in good condition.

2. Check whether the powder of granular raw materials is dry, and the powder content in the granules does not exceed 10%. If it is unqualified, please do not press hard, otherwise it will affect the normal operation and service life of the tablet press and the loss of raw materials.

3. For the first test, place the indicator needle of the pressure regulator control on 6 and pour the powder into the hopper. Turn the test handwheel by hand, adjust the filling volume and pressure at the same time, and gradually increase the weight and hardness of the tablet. Finished product requirements, then start the motor, and then open the clutch for formal production. During the production process, the quality of the tablets must be regularly sampled to check that they meet the requirements and, if necessary, to make adjustments.

4. The choice of speed directly affects the service life of the tablet press. Due to the nature of raw materials, the viscosity, tablet diameter and pressure cannot be uniformly specified when used. The structure of the machine has a stepless speed change device, which is suitable for pressing phytoplankton, large minerals with large diameter, poor viscosity and other reasons and fast, difficult Molded material. Quick application for crimping, good smoothness and easy-to-form material. Therefore, users must decide according to the actual situation.

5. The management personnel must be familiar with the technical performance, internal structure, and working principle of the control mechanism of the tablet press, and must not open the workplace during operation. In order to prevent breakdowns and parts damage, safe production is the premise.

6. In use, please always pay attention to whether the sound of the tablet press is normal. If there are screeches and strange noises, stop and check the car to troubleshoot the problem. Do not force it.

7. Do not take off the protective cover, safety cover and other equipment on the tablet press and equipment, and install them correctly when in use.

8. The mold must go through strict flaw detection test and visual inspection. It must be free from cracks, deformations, edges, hardness and accuracy. If it is unqualified, do not use it to avoid serious damage to the tablet press.

9. The feeding device is flush with the surface of the turntable, and the height is accurate. If the content is high, it will cause powder leakage; if the content is low, it will produce copper dust and affect the quality of the tablet.

10. Do not use raw materials with a lot of fine powder, because it will cause a lot of flying powder on the upper punch, and a lot of material will leak out on the lower punch, which will affect the wearability of the tablet machine parts and the failure of raw materials.