Process layout of plant and equipment in capsule clean workshop
Process layout of plant and equipment in capsule clean pharmaceutical cleanroom
Clean pharmaceutical cleanroom capsule filling machine is divided into intermittent type and continuous type according to the operation mode. According to the filling method, there are hole disk filling and intubation filling; automatic disk hole intermittent capsule filling machine is a kind of intermittent operation, porous plug dose Fully automatic filling machine, which can automatically complete the bag filling, filling...
Text label: Capsule clean pharmaceutical cleanroom, process layout of clean workshop equipment
Process layout of plant and equipment in capsule clean workshop
Clean workshop capsule filling machine is divided into intermittent type and continuous type according to the operation mode. According to the filling method, there are hole disk filling and intubation filling; automatic disk hole intermittent capsule filling machine is a kind of intermittent operation, porous plug dose This type of automatic filling machine can automatically complete the whole process of filling capsules, such as capsule separation, filling, waste rejection, capsule closure, finished product launch, waste capsule removal, etc. There is an indexing center turret inside the capsule filling machine, which rotates clockwise and passes through The intermittent movement of the central rotating disc guides through the different stations to complete the filling.
The working process of capsules is to load empty capsules into the hopper, press the auxiliary machine start button, and turn the machine with the handwheel to make the capsules in the mold; the cleanliness level of the capsule machine workshop can reach D level, and the main set of full Equipment such as automatic hard capsule filler, vacuum cleaner and vacuum pump; the distance around the equipment from the wall is at least 1.2m, and the distance between the ground where the equipment is installed and the top is at least 2.6m, so as to facilitate other operations such as peers, maintenance and cleaning. When the fixed protective cover and movable cover are removed, it is forbidden to use the automatic mode to operate the machine, it is forbidden to soak the machine parts with alcohol for a long time, and it is forbidden to use alcohol to scrub the powder feeding transparent tube and plexiglass products. Zhongjing Global Purification can provide consulting, planning, design, construction, installation, transformation and other supporting services for capsule clean workshops and dust-free workshops.
The maintenance of the machine is divided into daily maintenance and emergency maintenance. Daily maintenance is the work that needs to be carried out every day, including preparation before starting and maintenance after starting. To add lubricating oil, turn the handwheel before starting the machine to make the central turret of the machine rotate for a full week before starting the machine. After starting the machine, maintenance includes cleaning the vacuum pump filter, cleaning the vacuum nozzle and vacuum pipe in the packaging area, cleaning the machine table, etc. After the condensed thimble is installed, install its condensed thimble pressure plate immediately. After the condensed thimble pressure plate is removed, immediately remove the condensed thimble; remove the thimble, discharge the thimble, and clean the thimble must be installed in place and to the end according to its correct position, and fasten the square head bolt , and then check whether the installation is suitable, and slowly turn the handwheel to observe whether each thimble is in the center of the die hole. If it is not suitable, it needs to be readjusted; if the machine stops automatically, the reason should be found out and restarted; the machine parts are installed, and the machine is turned on. Before starting the machine, turn the handwheel to make the central turret of the machine rotate for a full week before starting the machine; the maintenance of the machine, such as the replacement of the transmission belt, the replacement or filling of the lubricating oil, the maintenance of the vacuum pump and the vacuum cleaner, etc., shall be carried out in strict accordance with the operating instructions.
SUZHOU PHARMA MACHINERY CO.,LTD. is different from other companies as we provide timely and unique services to our respected clients.
SUZHOU PHARMA MACHINERY CO.,LTD.’s core aim is to afford high-quality products with the concept of manufacturing technology.
SUZHOU PHARMA MACHINERY CO.,LTD. has extented its range of manufacturing scale, which satisfys customers' needs.
The global market is estimated to reach a value of almost extraction machine in the next decade. have a robust position in the extraction machine market because of its proven high potency in extraction machine.
SUZHOU PHARMA MACHINERY CO.,LTD. has been making a name for itself as a producer of some of the finest in the China, and it has been singing its praises for some time.