Production layout and installation of big honey pills in GMP workshop
Production layout and installation of big honey pills in GMP pharmaceutical cleanroom
Process flow of big honey pill production line in GMP pharmaceutical cleanroom: mixing → glutinous rice balls → extruding and slicing → pill making → drying pills → cellophane wrapping → shelling → waxing → printing → blister → boxing. The mixer has a large one-time installed capacity and high production efficiency, and is most suitable for use in large-scale production lines...
Text label: GMP big honey pill production workshop, GMP pharmaceutical cleanroom layout and installation
Production layout and installation of big honey pills in GMP workshop
Process flow of big honey pill production line in GMP workshop: mixing → glutinous rice balls → extruding and slicing → pill making → drying pills → cellophane wrapping → shelling → waxing → printing → blister → boxing. The mixer has a large one-time installed capacity and high production efficiency, and is most suitable for use in large-scale production lines; evenly mixed and stirred, it is especially suitable for strong stirring of viscous materials, such as concentrated pills, honey pills and flour materials in the food industry; according to the material Different shapes of stirring paddles can be used, and the number of revolutions of the stirring paddles can realize stepless speed regulation; no dust goes out during stirring, which purifies the production environment of the workshop.
When feeding the big honey pill machine, it is strictly forbidden to put foreign objects into the hopper, so as to avoid damage to the pushing system and the rolling knife roller. The fine-tuning of the bars cannot be adjusted; the power must be turned off when disassembling and assembling the propeller; the reducer and gearbox should be lubricated in time, and the new oil should be replaced for three to five months after normal operation. When starting the cellophane machine, it is necessary to conduct a trial operation by jogging, confirm that everything is normal, and then start the host, and gradually increase from low speed to high speed; be familiar with the performance of the machine, and have the ability to identify and judge abnormal phenomena; Regularly check the fixed parts, oil hole lenses, digital operators and other parts that reflect the internal conditions of the machine; for important connecting parts, always check whether the fixing bolts are loose, if they are loose, they must be re-tightened immediately; the important parts of the machine should be To frequent inspections, problems should be dealt with in time, otherwise it is easy to cause damage to the machine, such as parts and components that require more precise positions such as transmission gears, grippers, shot rods, ejector rods, etc.; oil-water separators should be regularly drained; Always check whether the airtightness of each gas interface is good, and whether there is any leakage in the gas pipe; some wearing parts of the machine should be observed and debugged frequently. Parts that are prone to change in position due to wear and tear should be observed and adjusted frequently. Zhongjing Global Purification can provide consulting, planning, design, construction, installation, transformation and other supporting services for GMP workshops and GMP clean workshops.
The power supply, air source and negative pressure source must be cut off after each work shift and before the machine is maintained; check the suction cup for damage and air leakage every day and clean the dust; check the positive pressure and negative pressure before each start-up Is it turned on and rated; grease the linear guide every two weeks. The printer must be cut off when the person leaves the machine to avoid misoperation by the miscellaneous personnel; the equipment should be maintained once a week, and the wear of the wearing parts should be checked. Lubricate linear guides and ball screws to prevent downtime during production due to poor screw operation.
The manufacture marketing game of CUSTOM SOLUTION SERVICES is changing with each innovation, and businesses of all products need to be ready to pounce.
SUZHOU PHARMA MACHINERY CO.,LTD. is a company that offers reliable products. For customization, extraction machine and extraction machine in different styles are also in the offer list. Click PHARMA MACHINERY for more details.
Obviously, financial return is important in manufacturing CUSTOM SOLUTION SERVICES, but I think that's not enough. I think many customers want to support something they really believe in.
Consistency and simplicity go hand in hand. That means aligning PHARMA with the right platforms, speaking to the right customers with the right message, and selling the right idea.