Structural features and lubricating parts of high-speed tablet press
The high-speed tablet press is used to press various granular raw materials into round tablets and special-shaped tablets, and is the basic pharma machinery suitable for mass production. Its structure is double pressure type, with two sets of feeding devices and two sets of wheels. 33 pairs of dies can be installed on the turntable, and 66 pieces can be pressed after one rotation. The speed of the turntable, the filling depth of the material and the thickness of the tablet can be adjusted during tablet pressing. The mechanical buffer device on the machine can avoid damage to the machine parts caused by overload. The machine is equipped with powder suction box. The dust generated when the machine is running can be sucked through the suction nozzle to avoid sticking and clogging, and the raw materials can be recycled for reuse. The installation of the punching die of the high-speed tablet press: ⑴ Install the upper punch: loosen the fixing screw of the lower punch, turn the hand wheel to raise the lower punch to a higher position, and insert the lower punch into the hole of the lower punch (note that the lower punch Align the slope of the notch of the rod with the lower punch fastening screw and insert it to the bottom) Tighten the lower punch fastening screw. ⑵Install the lower punch: Loosen the fastening nut of the upper punch, insert the upper punch rod into the hole of the upper punch rod, insert it to the end, use a wrench to clamp the hexagon at the lower part of the upper punch rod, and tighten the upper punch fastening nut. (3) Install the middle mold: loosen the fixing screws of the middle mold, put the middle mold flat into the hole of the middle mold platen, and at the same time make the lower punch enter the hole of the middle mold, press it to the end and tighten the middle mold fixing screws. When placing the middle mold, care must be taken to hold the middle mold flat, so as not to get stuck when it is placed in a skewed manner, and damage the hole wall. ⑷Turn the handwheel by hand so that the upper punch slowly descends into the middle mold hole, and observe whether there is any collision or friction. If there is collision or friction, loosen the fixing screws (two) of the middle mold table and adjust the middle mold table Fix the position of the plate so that the upper punch enters the hole of the middle mold, and then tighten the fixing screws of the middle mold platen, and adjust it until the upper punch enters the middle mold without collision or friction before the installation is qualified.
PHARMA can also foster research that is more useful and influential in society at large.
All you women out there looking for amazing to dazzle the world try SUZHOU PHARMA MACHINERY CO.,LTD. latest collections at PHARMA MACHINERY. Try it!
We want to be careful and deliberate about developing PHARMA, from the platform we choose, to the way we approach it, to the methods we use.
CUSTOM SOLUTION SERVICES is one of the best products sold in the market today.
SUZHOU PHARMA MACHINERY CO.,LTD. always focus on the situation of global market and understands the importance factors of manufacturing CUSTOM SOLUTION SERVICES.