Supercritical for vegetable and herb oil co2 extraction device
Product Application
1.This system is multi-function SCFE equipment, the working mode is intermittent or continuous way to extract solvent from solid or liquid material, the additive can be add to the supercritical fluid.
2.The system has one extractor and two separators.
3.The highest working pressure of solid extractor is 50Mpa, the highest working temperature is 95℃.
4.The design of pressure vessels according the related national standard and rule demand and with over pressure protection system which means enough safety valves.
5.The whole equipment beauty, safety and easy operation, pressure temperature flow number can be showed from pressure meter and digital instrument. The material of pipe parts, valves, pipe lines, are all stainless steel(1Cr18Ni9Ti).
Main Features
1. Easy to operate and adjust,well selectivity. Can extract out requested component according to control pressure and temperature.
2. Low operating temperature. Operation often happen under room temperature, which is much better for
Heat-sensitive Materials. Because during extraction process, it has avoid "when oxygen oxygenation" and
"when light reaction", product can keep its natural tastes.
3. Finish within one step, CO2 won't be left on the products,CO2 is one kind gas of non-poisonous, tasteless,
inflammable, cheap and can be cycle use.
4. CO2 can be recycled, and be equipped with return circuit which saves gas.Adopt new methods of fluid
distribution uniform fluid distribution, which makes CO2 fluid and solute uniform contact to speed up the
dissolved, shorten extraction time, increase production
5. Each kettle has function of measuring and controlling temperature system, which can effectively and accuracycontrol the temperature.
Our Tank Volume
We calculate the extraction capacity with the inside basket capacity.Inside of the extraction tank capacity.
So our tank will be larger than others about 1.3~1.5 times.This also mean that our 10L machine is others 13~15Lmachine.
Our Co2 Pressure Pumb
Others Factory Co2 Pressure Pumb
The normal pumb pressure only 40Mpa.
Machine adopted low quality Iron Steel.
The pumb stick is ceramic layer stick or steel stick which is easy to wear and leak CO2.
The max pressu is low so not safe to use.
The using life only 5-15 months.
Once the pumb broke is very hard to repair and experience to replace also need installation fees.
Our Pressure Valve
Others Factory Pressure Valve
Low quality material adopted the factory no any guarantee.
The handeel easy to broke and the valve easy to wear lead to the co2 leak even occur accident.
Once the valve broke is very hard to replace and installation.
Our Cooling System
High efficiency 5.17KW-Air-cooled type make the CO2 tank low down in the suitable temperature easy to running.
Machine with Environmental refrigerant meet the environmental standard and high heat exchange efficiency.
Others Factory Cooling System
Low efficiency heat exchange.Low cooling power and the actual working is far below the machine marked.
The bad quality cooling refrigerant easy to leak cause pollution and worker injured.
Our pipes connection and quickly interface desgin
All the pipes are covered with insulation cotton to avoid the temperature change form condensate water damage machine and low down the noise greatly
And our machine is designed only need connect 6 quickly interface pipes.This is easy and save at least USD 6,000-10,000 engineer abroad installation fees.
Others Factory Pipes
All the pipes are bare in the air.The connection area need engineer weld in customer factory cause great deal of fees.