The installation of our sterile room is simple if you follow the guidance of our instruction manual or demonstration pictures and video step by step. But if you encounter problems during installation, please contact us immediately in case of wrong installation and damage of products. Call us, email us, or leave us a message online. Our service team is always ready to offer attentive and responsive customer service and professional technical support. What we are always pursuing is to provide every customer with satisfactory and considerable service.

SUZHOU PHARMA MACHINERY CO.,LTD. is a large professional sterile room manufacturing company. The Panel series has many styles to meet the diversified needs of customers. SZ PHARMA MACHINERY sterile room is made of high quality raw materials that are well selected from suppliers. The inspection of each process of the product is a guarantee of its outstanding performance.

We are committed to the development of our people at all levels, ensuring that all our employees have the requisite skills and best practice knowledge to deliver actions that will drive organizational performance in keeping with and exceeding our clients’ expectations and demands.

What are the types of wind shower room?
Single blow type
One side plate has a nozzle, which is suitable for factories with low requirements, such as food packaging or beverage processing, bucket water production, etc
Double blow type
One side plate and the top plate are equipped with nozzles, which are suitable for domestic food processing enterprises, such as small-scale enterprises such as cake making and dried fruit
Three blow type
The two side plates and the top have nozzles, which are suitable for export processing enterprises or industries with high requirements such as high-precision instruments.
Color steel plate air shower room
It is suitable for workshops with dry environment and few users, and the price is low.
Cold rolled steel plate air shower room
(acid pickling, phosphating, electrostatic spraying) is applicable to electronic factories. There are a large number of users. As the door is made of stainless steel, it is very durable, but the price is relatively moderate.
Stainless steel plate air shower room (SUS304)
It is suitable for food processing and medical and health products processing industries. The workshop environment is humid but will not rust.
How to maintain the air shower room??
For the maintenance of the air shower room, a frequency shall be determined according to the actual use. For example, the front filter screen can be cleaned by water washing or vacuum dust washing. Normally, it is replaced within three months. If the main filter screen is detected 2 to 4 times a year, the clean workshop should decide whether to replace the device according to the wind speed or pressure measurement value. Specifically:
1. remove and clean the filter material in the primary air filter regularly according to the actual use.
2. when the wind speed becomes smaller, first check whether the surface of the primary air filter is blackened. If it is blackened, it indicates that the pre filter contains more dust and the resistance increases, that is, the non-woven fabric in the primary air filter should be removed for cleaning or replacement.
3. if the wind speed cannot be increased after the non-woven fabric is replaced or cleaned, it indicates that the high-efficiency air filter has been blocked, resulting in increased resistance. The high-efficiency air filter should be replaced.
4. when replacing the high-efficiency air filter, remove the spray ball plate, remove the high-efficiency filter, and replace the new high-efficiency air filter according to the specification and model of the original high-efficiency filter. Confirm the arrow mark on the high efficiency filter during installation, and the arrow should point to the direction of air flow. And ensure good sealing to prevent leakage.
5. after the replacement of the high-efficiency filter, it is necessary to confirm that the frame is free of leakage, and properly use the dust particle counter for detection. It can work normally only after reaching the technical indicators.
6. regularly repair the electrical circuit. In case of any fault, refer to the electrical schematic diagram for maintenance.
7. regularly maintain the door so that the electronic lock is aligned with its lock hole to avoid locking pin.


Suzhou Pharma Machinery Co.,Ltd.
2022/06/13
Alice

SUZHOU PHARMA MACHINRY Small Class~

Ultraviolet sterilization

Ultraviolet can kill a variety of microorganisms, including bacterial propagules, spores, viruses, fungi, mycoplasmas, etc. The ultraviolet ray used for disinfection is 200~275nm C-wave ultraviolet, and the wave band with the strongest bactericidal effect is 250~270nm. The germicidal efficacy of ultraviolet rays is directly related to the intensity of ultraviolet radiation. The ultraviolet light source used for disinfection must be able to produce radiation values that meet the national standards (when the voltage is 220V, the environmental relative humidity is 60%, and the temperature is 20 ℃, the intensity of ultraviolet rays must not be less than 70 μ W/cm2). In order to obtain satisfactory ultraviolet radiation intensity, it is necessary to put forward corresponding requirements for the glass tube, reflector and service life of the ultraviolet lamp. Ultraviolet disinfection was widely used by drug manufacturers before other disinfection methods were used. Common form: UV germicidal lamps are uniformly distributed on the ceiling of the clean room, and the surface and air are disinfected and sterilized by using the UV radiation generated by them.

advantage:
It is easy to operate, convenient to manage, flexible, and can disinfect and sterilize individual rooms at any time according to production needs.

Disadvantages:
1. The ultraviolet intensity emitted by the ultraviolet lamp decreases with the increase of the use time, so the disinfection and sterilization ability is constantly weakened.
2. The ultraviolet ray penetration is weak, easy to be blocked by production equipment, and dead corners appear, affecting the sterilization effect.
3. Ultraviolet sterilization is greatly affected by relative humidity. When the relative humidity in the clean room is>60%, its sterilization effect is significantly weakened. When the relative humidity is>80%, it should not be used.
4. The ultraviolet radiation energy is low, which can only kill the microorganisms directly exposed to it. Therefore, the disinfected parts must be fully exposed to ultraviolet radiation.
5. The distance from the surface of the object exposed to ultraviolet radiation should not be more than 1.50m.


Suzhou Pharma Machinery Co.,Ltd.
2023/01/03
Alice