Talking about the Application and Operation of Electric Powder Tablet Press
Electric powder tablet press machine is a small, flower basket type continuous automatic tablet press machine. It is one of the necessary equipment for pressing granular raw materials into tablets or granules in pharmaceutical, chemical, food, electronics and other industrial sectors. It is suitable for small-batch production, laboratories, hospitals and other units to suppress tablets, coal, sugar tablets, calcium tablets, coffee tablets, powder metallurgy, electronic components and various agricultural fertilizer tablets, etc. It can suppress all kinds of irregular-shaped and ring-shaped tablets, and it can suppress tablets with logos, texts and simple graphics engraved on both sides. Application and operation: 1. When the machine is in use, it is necessary to check whether the die has quality problems such as missing edges, gaps, deformation, etc., and check whether the pharma machinery of the machine is in good condition. 2. Check whether the original granules meet the requirements. The fine powder content in the granules should not exceed 10%, so as not to affect the performance and life of the machine. 3. Rotate the pulley by hand or press the start button to test the pressure before starting the machine to make sure that the tablets meet the regulations. After the machine is running normally, it can be started and put into production. 4. The machine is equipped with a turn start button, which can be applied when lamination or upper punch sticks to the car and checks the status of upper punch and die entry during tablet pressing. During use, it is only allowed to start instantaneously to make the machine turn over a small amount, otherwise it will damage the machine parts. 5. Pay attention to the running status of the machine at any time when using it. If there is any abnormal sound, it should be shut down and checked, and then used after troubleshooting. Maintenance and maintenance of electric powder tablet press: 1. There are oil marks on the machine parts, which can be filled with grease or grease according to the type of oil marks. All the oil should be supplied once before starting the machine, and it can be added according to the heating up and operating conditions of the bearing during production. 2. Regularly check whether the parts are running smoothly and damaged, and if any defects are found, they need to be repaired in time. 3. At the end of one use or shutdown, the remaining powder on each part of the machine should be cleaned; if the shutdown time is long, the die must be removed, and the machine must be wiped clean, and the shiny surface of the machine parts should be coated with antirust agent. 4. Die maintenance: Clean, dry and apply anti-rust grease, then place it in a suitable container to keep it clean and avoid bump damage.
However, CUSTOM SOLUTION SERVICES isn't the only producer in domestic, and many people feel that SUZHOU PHARMA MACHINERY CO.,LTD.'s service leaves much to be desired in terms of functionality and design.
At the heart of CUSTOM SOLUTION SERVICES is our Vision to be the global energy company most admired for its people, partnership and performance.
To properly understand what customers want, when, why and how they want it, SUZHOU PHARMA MACHINERY CO.,LTD. needs to pivot toward sentiment analysis, a burgeoning technology that taps into consumer demand based on natural language processing.
The global market is estimated to reach a value of almost extraction machine in the next decade. have a robust position in the extraction machine market because of its proven high potency in extraction machine.