The tablet press should not be overloaded_Tablet press_high speed_single punch_double layer_flower basket_multifunctional rotary tablet press

The should not be overloaded; the should be properly grounded and grounded separately; the hydraulic oil is N46 anti-wear hydraulic oil or N46 low-condensation hydraulic oil. months, and the oil quantity should be replaced every six months. If the system accidentally leaks, add enough hydraulic oil after troubleshooting.

After 200 hours of operation, the hydraulic press should check the cleanliness of the oil. No smell is required. A drop of oil was dropped on a white filter paper. There is no black spot in the center of the oil stain. Otherwise, the oil should be changed. If the transfer function is used, the air should be purged from the system. The net can work; keep the pressure for 10 minutes to decompress 2.5Mpa. The machine is not allowed to calibrate the mold during operation; always check the cleanliness of the pump station and the oil tank, and it is strictly forbidden for water, dust and foreign matter to enter the oil tank; if there is any abnormality during the test run and work, please stop the machine immediately.

The working process of the can be divided into the following steps:

1. The punch part of the lower punch (the working position is upward) extends from the lower end of the middle die hole to the middle die hole to seal the bottom of the middle die hole;

2. Use the feeder to fill the middle die hole with medicine;

3. The punching part of the upper punch (working position facing down) falls from the upper end of the middle die hole into the middle die hole, descends a certain stroke, and presses the powder into tablets;

4. The upper punch lifts the hole. The lower punch is raised to push the tablet out of the middle die hole to complete the tablet pressing process;

5. Drop to the original position and prepare for the next filling.

Rotary tablet presses are widely used in various industries such as pharmaceutical chemistry. This machine is suitable for pressing various granular raw materials into discs and tablets of different geometric shapes, and is specially used for small-scale batch production. Not suitable for pressing semi-solid, wet molecules and particle-free ultra-fine powders.

During operation, the turret speed, fill depth and tablet thickness can be adjusted. An overload protection device is installed in the system to prevent damage to molds and pharma machinery due to overload. This machine adopts immersion lubricating transmission mechanism, which is tightly installed under the machine body to prolong the service life of the machine and avoid cross-contamination.

Tablet Press machine The main product of PHARMA Machinery Co., Ltd., also produces a series of tablet presses such as single-punch tablet presses and rotary tablet presses. Welcome to consult customers to visit our factory

CUSTOM SOLUTION SERVICES extraction machine, as the name suggests, find extensive use in extraction machine institutions. Since extraction machine has become much dependent on technology in today's world, there is wide use of such CUSTOM SOLUTION SERVICES.

is making its name in professional extraction machine all over the world, and with SUZHOU PHARMA MACHINERY CO.,LTD. taking great care to make an excellent product & actively involved in keeping the industry well-regulated, it's a product that should make its way into your extraction machine.

Regularly improving CUSTOM SOLUTION SERVICES in accordance with customer feedback is a great way to show your brand listens and cares.