What is the situation of the split in the tablet press
The tablet falls off after being pushed out in the die hole, which means slivers. The reason why the shards occur is mostly because there is too much fine powder in the granules. There is air in the granules during compression, and the compression speed is relatively fast. The gap is relatively small, and the air is not excluded from the particles during compression, and is enclosed in the sheet. When there is no pressure, the air will expand, which will cause lobes. According to the above situation, we should first make a pre-pressing device for the fine powder in the granules, so that the air may escape. However, many situations are unexplainable. When the pressure is relatively high, cracks will occur. Lowering the pressure during tablet compression can prevent cracks. If the particles are too dry, cracks will occur, so